Sectional Doors

The Model 2720, 2700, and the 1350 are Amarr’s top-of-the-line high R-Value Doors. Constructed using 2” or 1-3/8” foamed-in-place polyurethane insulation which creates a strong monolithic panel that is energy efficient. The Model 2720 has a 20-gauge steel front skin that provides a perfect option for heavy industrial applications.

Each model is secured with standard 14-gauge, galvanized steel hinges. The interior skin of each section has two continuous horizontal 20-gauge reinforcing strips. The section joint is thermally broken and chemically bonded with a pressure-sensitive adhesive sealant. An EPDM rubber weather seal further enhances the performance of the joint.

Warranties

  • 10-year Limited Warranty on the paint and finish
  • 1-year Limited Warranty on hardware
  • See your dealer or visit amarr.com for complete warranty details

Colors

Amarr steel doors arrive pre-painted; for custom colors, exterior latex paint must be used. Visit amarr.com for instructions on painting. Actual paint colors may vary from samples shown.

The Model 2700 and 1350 use a brighter tone of white color than the 2720.

Optional Pass Door

Available for Model 2700 only in door sizes up to 16’2” wide x 16’ tall. Wind Load option not available.

Construction

Model 2720
Extra Heavy-duty 2” 20 Gauge Foamed-in-Place Door

MODEL 2720
R-Value
19.40*

Model 2700
Heavy-duty 2” Foamed-in-Place Door

MODEL 2700
R-Value
19.40*

Model 1350
Heavy-duty 1–3/8” Foamed-in-Place Door

MODEL 1350
R-Value
14.46*

*Based upon independent laboratory test results.
**Calculated door section R-value is in accordance with DASMA TDS-163.

Triple-Layer

Steel + Insulation + Steel

Track: All doors are available with both 2″ or 3″ track in Standard Lift, High Lift, Vertical Lift, Low Headroom, and Follow the Roof Pitch. Custom track configurations are also available. For drawings and more information, please visit www.garagedoor-virginia.com.

Hardware: Hardware includes minimum 14-gauge galvanized steel hinges and 13-gauge galvanized steel track brackets. All rollers have minimum 10-ball bearings.

Springs: Torsion springs are oil tempered, helical wound and custom computed for each door for a minimum 10,000 cycle life. Optional springs are available up to 100,000 cycle life.

Panels

Window Options